CREATE WIFI HOTSPOT USING COMMAND PROMPT

         USING  COMMAND PROMPT

Step 1 :    click on start menu and type " cmd " without quotes. Now  command prompt  will appear 

                

 Now on start screen. Right click on cmd and select " RUN AS ADMINISTRATOR" .

           
Note :  It is must that you run cmd as administration   privilege otherwise it will show error in next steps.   After clicking , computer will ask for permission select   "yes" then the command prompt screen will appear.

                         
                      

Step 2 :NOW to check whether the driver of your computer has drivers to support LAN or not, type" netsh wlan show drivers " without quotes .  It will show the output like the image.
 In the output Hosted network supported :Yes means that your compute supports hosted networks.



  
 If the result is "YES"  then move further else download & install the latest wlan driver for your computer then continue. 
Step 3 :  Type " cls " without quotes ,this will clear the screen .

Step 4 :   Now  to create the hotspot network  type following code in cmd  :
 
netsh wlan set hostednetwork mode=allow ssid=techvijay   key=password                replace techvijay with your desired ssid  and password with your password(at least 8 character) for the network and hit enter . for example we are creating our hosted network                   

Step 5 :  To start the Hot spot you just created type ---
                   netsh wlan start hostednetwork     and hit enter key

Step 6 : you will find your hot spot in all wifi enabled devices near you computer). connect to it by inputting you password chosen during creation and enjoy !!  

THank you..........